Note: These directions are general guidelines intended for use by qualified medical personnel. 1. Place the prescribed medication into the nebulizer jar. 2. Carefully snap the lid over the jar. 3. Connect one end of the supply tubing to the small stem at the bottom of the nebulizer. 4. Attach the nebulizer to the mask inlet. 5. Connect the remaining end of the supply tubing to the desired pressure source. 6. Set oxygen flow to 5~6 LPM and check for flow through the device. (The optimum amount of flow may vary between pressure sources.) 7. Place the mask on the patient's face with the elastic strap below the ears and around the neck. Gently pull the ends of the strap until the mask is secure. Shape the metal strip on the mask to fit the nose.
Nebulizer Jar: Made from clear pp size: 6ml, 20ml
Mouth piece Made from non-toxid ABS, 6ml and 20ml nebulizer can be connected
