|
Brief introduction:
servo-controlled by micro-computer with option of automatic control or manual control the temperature; skin temperature sensor and bed temperature sensor; touch switch panel, setting temperature, real temperature, and APGAR timer can display, heating power rate indicates 0-100%; multi-function self-checking alarms; horizon angle of radiant head can be adjusted in two ways; inclination of bassinet is adjustable; x-ray cassette is under the bed; RS232 connector, data output.
Standard configure:
radiation head, temperature controller, skin temperature sensor, bed temperature sensor, infant bed, I.V. Pole, tray, x-ray cassette, bed deck, Stand.
Technical specification:
Power supply : AC220V 50HZ
Power input: 700VA
Temperature control range:25ºC~37ºC
Sensor precision: <=0.3ºC
Uniformity of bed temperature: <=2.0ºC
Adjustment angle for the radiation head :0º,30º,60º
inclination of infant bed: +/-15º
APGAR Timer: it has sound indication in 1min, 5min, 10min.
Alarming:
with audible and visible alarm, and it can indicate the real temperature and cut off the power supply of heater;
Over-temp alarm: when the skin temperature >39.5ºC;
Deviation alarm: indication temperature deviates away the setting temperature +/-1ºC;
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the outside of bed;
Power failure alarm: when start up the unit, but there is no power and the power cord is disconnected.
System alarm: when there is system malfunction inside of temperature controller.
Package:
Gross Weight:110Kg
Measurement:1270mmx810mmx1110mm
| 
