|
Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; the infant bed can be pulled out from the side door; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.
Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, cabinet.
Technical specification:
Power supply: AC220V, 50HZ
Power input: <=600VA
Temperature control range:25ºC~37ºC
Changing of temperature: <=0.5ºC
Uniformity of temperature: <=0.8ºC
Temperature rising time: < 45 min
Noise level: <=55dB (A)
Average radiation of blue light: >=500u W/cm2
Timing range of blue light timer:0~9999 hour 59 minutes
Accumulative error of blue light timing:<=0.002%
Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control <=38ºC;
Deviation alarm: air temperature control +/-3ºC;
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed <=1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.
Package:
Gross Weight:83Kg
Measurement:1085mm x640mm x1110mm | 
